The 32 inch touch screen with lcd display,G+G structure, ILI2312 touch controller iC, support operation with thick gloves ,thick tempered glass and thick PC on the top, mainly used in industrial, medical, outdoor advertising and other equipment. Deep customization including structural, surface treatment such as AG AR AF and other special effects are supported; All kinds if interface conversion Boards and drive Boards are provided to meet requirements from various customers.
The display resolution of this capacitive touch screen module product is 1920*1080, with a full view angle, which can match the VGA or HDMI interface driver board, and the capacitive screen USB interface, it is more suitable for application in some areas where the environment is slightly better. The module products are suitable for use on the equipment installed by the flat assemble module structure, and the capacitive touch screen structure part can also support deep customization;
|Model Number||HX3201803 V1.0|
|Operating Temperature||0℃ ~ 50℃|
|Storage Temperature||-20℃ ~ 60℃|
|Outline Dimension||754.70x449.30x30.38 mm|
|Viewing Area||698.70x393.30 mm|
|Active Area||698.406x392.85 mm|
|Support Systems||Windows/Android/Linux etc.|
|Touch Points||10 points|
|Power Supply Voltage||5V|
Capacitive touch screen has been increasingly used in various fields with rapid technology development. In order to meet different requirements of worldwide customers, Grahowlet supply all kinds of product structures such as G + G, G + F (G + F + F ),P + G, etc. and various technical support programs such as Cypress , Atmel, EETI, FocalTech, Goodix etc. according to different application environments.
Support gloves made of various materials such as nylon,latex,cotton,plush and leather and of different thickness,6mm the thickest.
Support touch with water,oil,
oil-water mixture and brine
Support normal touch with thick cover like tempered glass,15mm the thickest
Anti Glare (AG) processing could eliminate screen surface mirror problem through converting direct light to diffuse light on the touch screen.
AF processing is adding on the cover glass a king of coating that could increases surface smoothness, reduces surface sliding resistance , residual water and fingerprints on the surface significantly and improves feeling and clarity.
As there are more and more touch panel application in all industries, Grahowlet has a good understanding of the difference between capacitive touch screen application and consumer electronics application. In order to ensure the smooth operation and market promotion of customers’ end products, Grahowlet would ensure following aspects:
1.Debugging Service : In most cases, customers in this industry might have debugging problems for both capacitance touch screen and the main-board , so Grahowlet strengthens technical guidance and provides software debugging assistance under the whole system for the customer.
2.Application Environment: End product application environment is various and complicated and in response to different environmental application requirements, Grahowlet specially improves the promotion of industrial touch programs such as Cypress and Etta MEL, increasing the anti-interference and optimizing some special touch manners.
3.Validation and Test: End products in touch industry generally need to be specifically certified and pass many kinds of tests such as servo motor disturbance test, salt spray test, military specifications aging test, high and low temperature aging test, ESD, EFT, tumbling test, etc. Grahowlet can provide rich and effective solution.
4.Pilot Production : Compared with consumer electronics, capacitive touch screen end product volume is generally lower and development and verification lead time is relatively longer. To serve customers' operation mode better, Grahowlet specially provide small batch production between prototype building and mass production without quantity limitation.
Q1: What kind of delivery method you always choose?
A:DHL/FedEx/UPS/EMS/TNT is accepted, and it is better if you have your own freight agency. For mass order, we will choose ship by sea.
Q2:What is the lead time of the products?
A:3-5 working days for Samples in stock after receiving payment. 4-6 weeks for bulk orders.
Q3: Have you ever exported to foreign countries?
A: We have exported to France, Norway, UK, Poland, USA, Austria, Denmark, Greece, Netherlands, Canada, Brazil, Korea, and many other countries.
Q4: What certifications does you products complied to?
A:ROHS, ISO9001, ISO14001, QC080000
Q5. What is the MOQ?
A:It depends on different products. Please keep in touch with sales to confirm the MOQ.
Q6:Can you produce custom-made projected capacitive touch screen panel overlays?
A:Yes, welcome to customize the projected capacitive touch screen panel products according to your requirements.